©2001 Innoveta
TM
Technologies, Inc. 1/2 10/19/2001
Revision 2
Advance Product Brief: Supereta™ Series – Single Output High Current Quarter Brick
iQN 28V 7A Advance Product Brief 11/19/2004
TDK Innoveta Base
Product Code
Input
Voltage
Output
Voltage
Output
Current
Efficiency
100%Load
iQN48007A280V 36-75V 28V 7A 92%
Input Characteristics
Operating input range 36-75V
Transient input voltage 100V 100mS max
Turn-on voltage 34.5V
Turn-off voltage 32.3V
Start-up time 50 mS On/Off to 90% Vout
Maximum input current 7A Input 0-75V, Io,max
Output Characteristics
Output Initial set-point accuracy +/- 1% Vin=Vin,nom, Io=0A,
Tc=operating range
Efficiency 92% Io,max
Line regulation 28 mV Over rated input
Droop Rate 0.125 V/ A Help to load share
Load regulation 28 mV* Over rated load
* Excluding the droop
Output voltage adjustment 60%-110% %Vo,nom
Output ripple 75 mVp-p 20MHz bandwidth
Output current range 0 to 7A With voltage droop
Dynamic response
Transient voltage
Recovery time
375 mV
0.85 mS
Load step 25% of
Io,max
slew rate =0.1A/us
Output Load Capacitance 5000 uF
Min ESR > 3mΩ
Ripple frequency 310 kHz Fixed
Protection
Output over-current Constant Current Voltage foldback
Short circuit Constant Current Continuous protection
Output over-voltage 120% of Vout,nom Latching
Thermal shutdown 120C Auto recovery with
hysteresis
Environmental
Operating temperature -40C to 115C See full datasheet
The Supereta™ iQN Series offers an
industry standard quarter
brick
high current power module with true useable output power.
Its 92% typical
efficiency, a power density greater than 118W per
cubic inch, output voltage fold-
back current limit feature, and
s
uperior thermal performance make the iQN Series of power
modules ideally suited for wireless
applications to power various
RF amplifiers
. This rugged building block is designed to serve as
the core of the high reliability system. The droop current sharing
capability allows multiple modules connected in parallel to be
possible. A wide output voltage trim range, -40 to +10%,
sensing, and remote ON/OFF control are standard features
enhancing versatility.
• Standard Quarter Brick Pinout
• Size: 2.28” × 1.45” × 0.5”
• Up to 7A of output current
• Power density > 118W / in
3
• Efficiency – up to 93.5%
• Full load efficiency – 92%
• Droop load share (0.125V/A)
• Voltage foldback constant current limit
• Wide output voltage trim range 17-30.8V
• Insulated Metal Substrate (IMS) for high
usable power
• Suitable for wireless RF applications
• Basic insulation – 1500Vdc
• Choice of remote on/off configuration
• Remote sense
• Constant switching frequency
• Latched output over-voltage protection
• Auto-recovery full protections:
o Input under and over voltage
o Output over-current
o Output short circuit
o Thermal limit
• UL 60950 (US and Canada), VDE 0805,
CB scheme (IEC950) Safety markings
and CE Mark (EN60950)
• Optional 0.110”, 0.180”, 0.200” pin length
• Optional Thru-Hole PEM Studs
• Optional non-latching OVP protection
• Optional Latched over-current protection
• Optional Latched OTP
• EMI: CISPR 22 A or B with external filter
• Multiple patents
• ISO9000 certified manufacturing facilities
Supereta™ iQN Series DC/DC Power Modules
48V Input, 28V Output, 200W Quarter Brick
Typical Performance
Comments to this Manuals